Fluke-Process Meter

Click image to enlarge
(FLUKE-789)
Mfg: Fluke®
Price Each: $1,039.99
Quantity:
  
PROCESSMETER The Fluke 789 ProcessMeter combines a loop calibrator with a DMM to give process technicians double the power in one tool. Fluke 789 has a display that's twice as large and twice as bright with two levels of backlighting. The 789 loop calibrators also have a built-in, selectable 250 ohm HART ® resistor, eliminating the need to carry a separate resistor. The Fluke 789 ProcessMeter is a DMM designed to meet 1000 volt IEC 1010 CAT III standards and a precision 1000V, 440 mA True RMS meter. It can take frequency measurement to 20 kHz, has Min/Max/Average/Hold/ Relative modes, diode test and continuity beeper. The dual display on Fluke 789 loop calibrators also have an enhanced backlight with two brightness settings which can show simultaneously mA and % of scale readout. The 0-100% mA Span Check buttons toggle between 4 and 20 mA. The infrared I/O serial port is compatible with the FlukeView ® Forms Software version 2.1. The fuses and battery are externally accessible for easy replacement. The Fluke 789 ProcessMeter ships complete with TL71 premium test lead set plus AC72 Alligator clips, four AA alkaline batteries, user manual and quick reference guide.
Features
  • Built with Fluke Connect
  • 1000 V RMS max voltage applied between any jack and earth ground
  • -40° to 140°F (-40° to 60°C) storage temperature
  • -4° to 131°F (-20° to 55°C) operating temperature
  • Range and resolutions:V DC: 400.mV, 4.000 V, 40.00 V, 400.0 V, 1000 VV AC (true-rms): 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 VmA DC: 30.000 mAA DC: 1.000 A (0.440 A continuous)A AC: 1.000 A (0.440 A continuous)
Technical Resources
Add a quantity below and we will automatically add it to your quote or buy cart when you click on the Add to Cart or Quote button above
Quantity:
Large meter case , Leather
Quantity:
Premium tool bag

Quantity:
Camouflage carrying case for multimeters process temp

Quantity:
Rugged pelican hard case, 80/180 series


Quantity:

Product overview: Fluke TPAK ToolPak™ Magnetic Meter Hanger

The Fluke TPAK ToolPak™ Magnetic Meter Hanger allows you to hang your meter on nails, hooks and many other objects so you can take your measurements hands-free. The kit includes powerful magnetic hanger, 9 inch hook and loop strap, a hook hanger and a general purpose hanger. Solves any hanging and positioning problem you may face. Attaches to most Fluke meters.

 

Quantity:
AC/DC CURRENT CLAMP,1000A DC,600A AC


Quantity:
PRESSURE/VACUUM MODULE
Quantity:
The AC220 is a SureGrip™ Alligator Clip Set is designed to improve steadiness in slippery hands. Rubber over-molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. Recommended for use with TL222 and TL224 test leads.


Quantity:
 Designed for use with STL 120 Shielded Test Leads and TL75 Test Leads. Accepts standard 0.08'' (2mm)-pin tip sized test probes. Nickel-plated steel jaw contact material with standard jaw opening of 5/16'' (8mm).

Quantity:
SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Quantity:
Test Probe adapter kit
Quantity:
MINI-HOOK TEST LEADS



Quantity:
MICRO-HOOK TEST LEADS
Quantity:
MINI-PINCER TEST LEADS

Quantity:
STRAY VOLTAGE ELIMINATOR TEST LEAD SET

Quantity:
TEST PROBES, SLIM-REACH, 2MM DIAMETER


Quantity:
ELECTRONIC TEST PROBES
Quantity:
INSULATED TEST PROBE


Quantity:
SUREGRIP MASTER ACCESSORY SET