Fluke-Process Meter W/Hart Communications

Click image to enlarge
(FLK-789/IR3000 BU)
Mfg: Fluke®
Price Each: $1,029.99
Quantity:
  
FLUKE-789 AND IR3000FC BUNDLE PACKAGE Fluke ir3000 offers Connect your Fluke test tool with the ir3000 FC connector and get all the benefits of the Fluke Connect® app. The Fluke 789 Offers Safety rated multimeters with mA source. Now process technicians can do a lot more while carrying a lot less. The ultimate loop calibration multimeter - the Fluke 789 Process Meter. The Fluke 789 Process Meter was the first tool to combine a loop calibrator with a DMM to give process technicians double the power in one tool.
Features
  • Fluke 789/IR3000 Converts your 789 Process Meter into a Fluke Connect Process Meter.
Add a quantity below and we will automatically add it to your quote or buy cart when you click on the Add to Cart or Quote button above
Quantity:
Universal Hard Carrying Case
Quantity:

Soft Carrying Case with Zpper and Detachable Accessory Pouch for 120 Series


Quantity:
Large meter case , Leather

Quantity:
Rugged pelican hard case, 80/180 series


Quantity:
Camouflage carrying case for multimeters process temp
Quantity:
AC/DC CURRENT CLAMP,1000A DC,600A AC


Quantity:
The Fluke i200 AC Current Clamp/Banana Plugs, 0.5A-240A AC is a small-sized single-range current clamp, featuring safety shrouded 4 mm (0.16 in) banana plugs. It is compatible with most digital multimeters or other current measurement devices that accept shrouded 4 mm (0.16 in) banana plugs and has an ac milliamp range.
 
Fluke AC Current Clamp
I200S
$264.99
Quantity:
The Fluke i200s AC Current Clamp/BNC, 0.5A-240A AC Switchable is a small-sized dual-range current clamp; it offers voltage output using a safety-insulated BNC connector.A dual banana-to-BNC adapter allows the clamp to be connected to meters with banana inputs. It is an ideal companion to a ScopeMeter, power quality meter, or digital multimeter.


Quantity:
The Fluke I410 AC/DC Current Clamp/Banana Plugs, 1A-400A AC/DC is a battery-powered, Hall-effect probe that measuress 1A to 400A AC/DC with a large-claw clamp, giving you access to difficult-to-reach areas. It is compatible with most multimeters and other devices that measure AC and DC current and accept shrouded 4 mm (0.16 in) banana plugs.

Quantity:
FIBER OPTIC METER, Plugs into any digital multimeter with a mV DC function & 10MΩ input impedance for testing and maintenance of fiber optic cables

Fluke Suregrip kit
L215
$112.99
Quantity:
Suregrip  kit with probe light and probe extender
Quantity:
PRESSURE/VACUUM MODULE



Quantity:
The AC220 is a SureGrip™ Alligator Clip Set is designed to improve steadiness in slippery hands. Rubber over-molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. Recommended for use with TL222 and TL224 test leads.
Quantity:
 Designed for use with STL 120 Shielded Test Leads and TL75 Test Leads. Accepts standard 0.08'' (2mm)-pin tip sized test probes. Nickel-plated steel jaw contact material with standard jaw opening of 5/16'' (8mm).

Quantity:
SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Quantity:
SUREGRIP LARGE ALLIGATOR CLIP


Quantity:
TEST LEAD ACCESSORY BUS BAR CLIP
Quantity:
INSULATION PIERCING CLIP


Quantity:
DUAL BANANA PLUG KIT
Quantity:
SUREGRIP MASTER ACCESSORY SET


Quantity:
The 80K-15 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photocopy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance.

Quantity:
PROBE, HIGH VOLTAGE Extends the Voltage Measuring capability of a DMM to 40,000V

Quantity:
The 80K-6 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance.
  • A high voltage probe that allows a multimeter to measure up to 6,000V. Intended for low energy applications only
  • One year warranty
Fluke Suregrip Air Probe
80PK-24
$124.99
Quantity:
SUREGRIP, AIR TEMPERATURE PROBE



Quantity:
SUREGRIP, TAPERED TEMPERATURE PROBE
Quantity:
PROBE,TEMPERATURE

Quantity:
SUREGRIP INDUSTRIAL TEST LEAD SET

Quantity:
SUREGRIP SILICONE TEST LEAD EXTENSION KIT


Quantity:
SUREGRIP ELECTRICAL TEST LEAD SET
Quantity:
SUREGRIP SILICONE TEST LEADS


Quantity:
TEST LEAD SET FOR HIGH ENERGY ENVIRONMENT
Quantity:
HEAVY DUTY TEST LEAD SET


Quantity:
HEAVY DUTY TEST LEAD SET

Quantity:
Test lead set. Premium DMM

Fluke TEST LEAD SET
TL75
$27.99
Quantity:
TEST LEAD SET
Quantity:
Test lead set, deluxe electronic



Quantity:
TEST LEAD SET,BASIC ELECTRONIC
Quantity:
HOOK AND PINCER TEST LEAD KIT

Quantity:
MINI-PINCER TEST LEADS

Quantity:
MINI-HOOK TEST LEADS