Fluke Industrial Scopemeter

Click image to enlarge
Mfg: Fluke®
Price Each: $3,139.99

The Fluke 125BNAS 40 MHz, 2-Channel, 40 MS/s Industrial ScopeMeter Hand-Held Oscilloscope with Bus Health, Accessories and Fluke Connect Compatibility is the rugged oscilloscope solution for industrial electrical and electro-mechanical equipment troubleshooting and maintenance applications. It is a truly integrated test tool with oscilloscope, multimeter and high-speed recorder in one, easy-to-use instrument. The 125B/NA/S also integrates with Fluke Connect mobile app and FlukeView for ScopeMeter software to enable further collaboration, data analysis and archiving of critical test information.

The 125B/NA/S includes innovative functions designed to help technicians troubleshoot faster and get the answers they need to keep their systems up and running. Display waveforms with Connect and View trigger and setup technology and automatically view related numerical measurements using Fluke IntellaSet technology, all without making manual measurement adjustments. With Recorder Event Detect capabilities, elusive intermittent events are captured and logged for easy viewing and analysis.

  • Bandwidth: 40 MHz; Dual-input digital oscilloscope and multimeter; Two, 5,000-count True-RMS digital multimeters; Connect-and-View trigger simplicity for hands-off operation
  • IntellaSet technology automatically and intelligently adjusts numerical readout based on measured signal; Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms, up to 10 KHz; Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements; Power measurements: W, VA, VAR, PF, DPF, Hz; Voltage, current and power harmonics
  • Check industrial networks with BusHealth physical layer tests against defined reference levels; Save or recall data and instrument setups
  • Store instrument setups defined by test sequences for routine maintenance, or for oft used test procedures; External, optically isolated USB interface to transfer, archive and analyze scope
  • Up to $3,000 in FREE gifts
Technical Resources
Add a quantity below and we will automatically add it to your quote or buy cart when you click on the Add to Cart or Quote button above
Fluke Test Adapter
BUS HEALTH TEST ADAPTER, DB-9 AND M-12 (Set of break-out adapters for the three most common industrial bus connection systems M12, DB-9 and RJ-45. Each board works as a straight-through connection for the bus cable and gives access to the individual wires and pins of the connector system for hooking up probes.)

Fluke AC Current Clamp
The Fluke i200s AC Current Clamp/BNC, 0.5A-240A AC Switchable is a small-sized dual-range current clamp; it offers voltage output using a safety-insulated BNC connector.A dual banana-to-BNC adapter allows the clamp to be connected to meters with banana inputs. It is an ideal companion to a ScopeMeter, power quality meter, or digital multimeter.

The Fluke I30S AC/DC Current Clamp/BNC, 30mA-20Arms AC/30mA-30A DC is based on Hall-effect technology. This battery-powered clamp measures both AC and DC current. It may be used with ScopeMeters and other suitable recording instruments for accurate, non-intrusive current measurement.


USB Interface Cable for Models 43 and 43B, and 120, 190 and 430 Series