Fluke Digital Multimeter

Click image to enlarge
(Fluke-28IIEX/ETL)
Mfg: Fluke®
Price Each: $1,699.99
Quantity:
  
INTRINSICALLY SAFE VERSION OF 28II WITH ETL APPROVAL - The Fluke 28 II Ex digital multimeter is the new standard for operating in harsh conditions. Combining the features and accuracy to troubleshoot most electrical problems with a completely sealed, IP67 rated case, the 28 II Ex is built to handle any situation, inside and outside of hazardous zones, without compromising compliance or measurement performance. The Fluke 28 II Ex multimeter eliminates the need carry different meters for different areas, or worry about crossing through an Ex-required zone with a non-Ex rated instrument. It has an extended operating temperature range of 5 to 131 °F, can operate in 95 % humidity, and is designed and tested to withstand 10 foot drops. The long battery life (up to 400 hours), backlit keypad, large display digits and 2-level bright white backlight increase visibility in poorly lit areas and keep you productive all day long in less than optimal conditions. The Fluke 28 II Ex multimeter measures up to 1000V and 10A ac and dc with True-rms for accurate measurement on nonlinear signals. Frequency measurements to 200 kHz and % duty cycle help you diagnose VSDs and switching power supplies. Resistance, conductance, diode test, capacitance, and temperature are also measured with a high degree of accuracy. Results are displayed on the bright, 4-1/2 digit LCD for precise measurements (20,000 counts).
Features
  • Digital Multimeter
  • Intrinsically Safe
  • IP67
  • 1000V and 10 A AC and DC
  • Low Pass Filter for accurate voltage and frequency measurement
  • Diode Test
  • Up to $3,000 in FREE gifts
Technical Resources
Add a quantity below and we will automatically add it to your quote or buy cart when you click on the Add to Cart or Quote button above
Quantity:
TYPE K, THERMOCOUPLE ADAPTER, Type K Thermocouple Mini Connector to Dual Shrouded Banana plug
Quantity:
Universal Hard Carrying Case

Quantity:

Hard Carrying Case with Configurable Foam Inserts


Quantity:

Soft Carrying Case with Zpper and Detachable Accessory Pouch for 120 Series



Quantity:
Rugged pelican hard case, 80/180 series
Quantity:
AC/DC CURRENT CLAMP,1000A DC,600A AC


Quantity:
The Fluke i200 AC Current Clamp/Banana Plugs, 0.5A-240A AC is a small-sized single-range current clamp, featuring safety shrouded 4 mm (0.16 in) banana plugs. It is compatible with most digital multimeters or other current measurement devices that accept shrouded 4 mm (0.16 in) banana plugs and has an ac milliamp range.
 
Fluke AC Current Clamp
I200S
$264.99
Quantity:
The Fluke i200s AC Current Clamp/BNC, 0.5A-240A AC Switchable is a small-sized dual-range current clamp; it offers voltage output using a safety-insulated BNC connector.A dual banana-to-BNC adapter allows the clamp to be connected to meters with banana inputs. It is an ideal companion to a ScopeMeter, power quality meter, or digital multimeter.


Fluke AC CURRENT PROBE
I2000 FLEX
$444.99
Quantity:
AC CURRENT PROBE

Fluke AC Current Clamp
I3000S
$649.99
Quantity:
The Fluke I3000S AC Current Clamp/BNC, 1A-3000A AC is designed as a clamp-on unit for use with oscilloscopes. It also includes a dual banana to BNC adapter for use with multimeters with 4 mm (0.16 in) banana input plugs. This clamp is optimized for measurement on power distribution systems.

Quantity:
The Fluke I410 AC/DC Current Clamp/Banana Plugs, 1A-400A AC/DC is a battery-powered, Hall-effect probe that measuress 1A to 400A AC/DC with a large-claw clamp, giving you access to difficult-to-reach areas. It is compatible with most multimeters and other devices that measure AC and DC current and accept shrouded 4 mm (0.16 in) banana plugs.
Quantity:
The Fluke I400 AC Current Clamp/Banana Plugs, 1A-400A AC is designed to offer maximum utility in a very compact shape. This high-safety, single range current clamp is compatible with most digital multimeters, and any other current measurement device that has an ac milliamp range and accepts 4 mm (0.16 in) shrouded banana.



Quantity:
FIBER OPTIC METER, Plugs into any digital multimeter with a mV DC function & 10MΩ input impedance for testing and maintenance of fiber optic cables
Quantity:
DELUXE LED HAT LIGHT

Quantity:
PROBE LIGHT AND PROBE EXTENDER

Fluke Suregrip kit
L215
$112.99
Quantity:
Suregrip  kit with probe light and probe extender


Quantity:
SUREGRIP LARGE ALLIGATOR CLIP
Quantity:
SUREGRIP INDUSTRIAL TEST LEAD SET


Quantity:
SUREGRIP ELECTRICAL TEST LEAD SET
Quantity:
Test lead set. Premium DMM


Quantity:
SUREGRIP MASTER ACCESSORY SET

Quantity:
The 80K-15 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photocopy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance.

Quantity:
PROBE, HIGH VOLTAGE Extends the Voltage Measuring capability of a DMM to 40,000V
Quantity:
The 80K-6 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance.
  • A high voltage probe that allows a multimeter to measure up to 6,000V. Intended for low energy applications only
  • One year warranty



Quantity:
SUREGRIP, INDUSTRIAL SURFACE TEMPERATURE PROBE
Quantity:
PROBE,TEMPERATURE

Quantity:
PROBE,SURFACE

Quantity:
TYPE K LANCE TIP PROBE, THERMOCOUPLE ASSEMBLY, TYPE K, LANCE TIP PROBE , MOLDED PLUG, 1M, BULK