Sound Meters / Calibrators
Click image to enlarge
The Sound Meter has been designed to check compliance with safety regulations and perform acoustic analysis by safety engineers, health, industrial and safety offices as well as quality control. Options include PC Interface and Software, Data logging and Recording Intervals from 1 second to 8 Hours.
The Sound Meters use two different weighting filters required by the IEC651 and ANSI S1.4 Type 2 for audio filtering. The A weighting is for general noise sound level and the C weighting is for measuring sound level of acoustic material control in various environments (ie 94dB 1 kHz etc.)
The Sound Meter Calibrator uses two output levels of 94 dB and 114 dB. The calibrator generates these fixed sound level signals for calibration of sound level meters. The unit ships with a ½" adaptor installed to accommodate sound meters and microphones with ½ diameter.
Features:
The Sound Meters use two different weighting filters required by the IEC651 and ANSI S1.4 Type 2 for audio filtering. The A weighting is for general noise sound level and the C weighting is for measuring sound level of acoustic material control in various environments (ie 94dB 1 kHz etc.)
The Sound Meter Calibrator uses two output levels of 94 dB and 114 dB. The calibrator generates these fixed sound level signals for calibration of sound level meters. The unit ships with a ½" adaptor installed to accommodate sound meters and microphones with ½ diameter.
Features:
- Easy to use
- Easy One hand operation
- Conforms to ANSI S1.40 - 1984 and IEC942 - 1988 Class 2
- Data logging features
- Software options
- PC Interface options