GE DPI 842 Frequency Loop Calibrator

Click image to enlarge
(DPI842)
Mfg: GE / Druck®
Price Each: $1,790.00
Quantity:
  
DPI 842 Basic Instrument; The GE Druck DPI 842 frequency loop calibrator measures or sources Hz, kHz, CPM, CPH, and pulses. GE Druck DPI 842 frequency loop calibrator is the ideal calibration tools for process technicians and electronic engineers because of their highly accurate calibration standard and versatility. Dedicated features facilitate test and maintenance of electronic circuits and frequency instruments including frequency meters, batch counters, tachometers, motion pickups, integrators, and flow meters.Every GE Druck DPI 842 frequency loop calibrator has an IDOS (Intelligent Digital Output Sensor) compatible port for connecting remote IDOS measurement modules. These include pressure sensors with ranges available from 1 psi to 10,000 psi. This feature provides users with a number of unique advantages; for example, a Druck DPI 842 frequency loop calibrator can become a fully functional pressure calibrator by adding a universal pressure module. IDOS measurement modules are interchangeable between any IDOS compatible instruments without calibration or set-up. They are true "plug and play" modules.The GE Druck DPI 842 frequency loop calibrator contains multiple advanced features to increase versatility and reliability:Automatic Trigger: Detects the best value regardless of waveform or amplitudeFrequency Scaling: Reads in process units; e.g. flow or revolutions/minuteProgrammable Step and Ramp Outputs: Simplify calibration and diagnosticsAdjustable "Nudge" Value: Provides an incremental output for setting switches, relays, trips, and alarmsAdvanced Features: Hold, maximum/minimum/average (with time stamp), scaling, tare (offset), and damping filter facilitate system checks and troubleshootingFeatures of the GE Druck DPI 842 Frequency Loop CalibratormA measure: Transmitter outputs and control loop signals can be measured, set, and calibrated. The DPI 842's dual channel capability allows transmitter inputs to be sourced/simulated while measuring the mA output. This means a single DPI 842 frequency loop calibrator can set-up, test, and calibrate transmitters and loops. The vast majority of the competition (generally referred to as single function) can only do one thing at once and cannot perform "closed loop" tests without other instruments and a loop power supply.24V loop power: This power supply energizes loops and transmitters. It is an essential feature when disconnecting transmitters from the loop for calibration or when the loop power is off during plant shut downs.HART Resistor: Can be switched into the loop when required for a HART digital communicator and avoids the inconvenience of carrying a 250O resistor.Automatic switch test: Captures open/closed trip values, providing a fast and highly accurate "safety system" check.Applications for the GE Druck DPI 842 Frequency Loop CalibratorPressure test and maintenanceTransmitter calibrationLoop set-up and diagnosticsSwitch testing
Features
  • Advanced frequency meter and generator with three output waveforms from 0.1 V to 24 V amplitude
  • Measure or source 0.01 Hz to 50 kHz
  • Sine, square and triangular waveforms
  • CPM, CPH and totalizing counter
  • mA measure, switch test and 24V loop power
  • HART loop resistor
  • Plug and play connector for Intelligent Digital Output Sensor (IDOS) Universal Measurement
Technical Resources
Add a quantity below and we will automatically add it to your quote or buy cart when you click on the Add to Cart or Quote button above
GE DPI 800 Case
IO800A
$57.60
Quantity:
DPI 800 Carrying Case
Quantity:
DPI 800 NiMh batteries with charger

Quantity:
DPI 800RS232 Serial Lead DPI800 IDOS